1. ABOUT THE DATASET
--------------------

Title:	Data Associated with ‘Wear and Deformation of Metal-on-Polyethylene Hip Bearings under Edge Loading Conditions Due to Variations in Component Positioning’

Creator(s): Murat Ali [1], Mazen Al-Hajjar [1,2], John Fisher [1], Louise M. Jennings [1]

Organisation(s): 1. Institute of Medical and Biological Engineering, School of Mechanical Engineering, University of Leeds, Leeds, UK. 2. DePuy Synthes Joint reconstruction, the orthopaedic company of Johnson and Johnson, Leeds, UK

Rights-holder(s):Unless otherwise stated, Copyright 2023 University of Leeds

Publication Year: 2023

Description: In Vitro Hip Simulation Data (Dynamic Separation, Load at the Rim, Wear Rate) Associated with ‘Wear and Deformation of Metal-on-Polyethylene Hip Bearings under Edge Loading Conditions Due to Variations in Component Positioning’

Cite as: M. Ali, M. Al-Hajjar, L.M. Jennings, Data Associated with ‘Wear and Deformation of Metal-on-Polyethylene Hip Bearings under Edge Loading Conditions Due to Variations in Component Positioning’. [Dataset], 2023, https://doi.org/10.5518/1316. 

Related publication: Murat Ali, Mazen Al-Hajjar, John Fisher, Louise M. Jennings,
Wear and deformation of metal-on-polyethylene hip bearings under edge loading conditions due to variations in component positioning,
Biotribology,
Volumes 33–34,
2023,
100238,
ISSN 2352-5738,
https://doi.org/10.1016/j.biotri.2023.100238.

Contact: l.m.jennings@leeds.ac.uk


2. TERMS OF USE
---------------

Copyright 2023, University of Leeds. Unless otherwise stated, this dataset is licensed under a Creative Commons Attribution 4.0 International Licence: https://creativecommons.org/licenses/by/4.0/.


3. PROJECT AND FUNDING INFORMATION
----------------------------------

Title: Innovation and Knowledge Centre in Medical Technologies 

Dates: 2012-2016

Funding organisation: EPSRC, TSB and BBSRC 

Grant no.: EP/J017620/1


Title: WELMEC: Engineering Solutions for an Ageing Population with Musculoskeletal & Cardiovascular Disease - 50 active years after 50 

Dates: 2009-2015

Funding organisation: Wellcome Trust and EPSRC 

Grant no.: NS/A000007/1 ; WT 088908/Z/09/Z 


Title: EPSRC Centre for Innovative Manufacturing in Medical Devices 

Dates: 2013-2019

Funding organisation: EPSRC

Grant no.: EP/K029592/1


4. CONTENTS
-----------
File listing
Figure_1_Dynamic_Separation
Figure_2_Load_at_rim
Figure_3_Wear_rates


5. METHODS
----------

- Experimental procedures/protocols as detailed in Murat Ali, Mazen Al-Hajjar, John Fisher, Louise M. Jennings,
Wear and deformation of metal-on-polyethylene hip bearings under edge loading conditions due to variations in component positioning,
Biotribology, Volumes 33–34, 2023, 100238, ISSN 2352-5738, https://doi.org/10.1016/j.biotri.2023.100238.