Research Data Leeds Repository

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | G | H | I | J | K | L | M | O | P | S | T | V | Y
Number of items at this level: 67.

A

Abdelgaied, Abdellatif and Fisher, John and Jennings, Louise (2017) Dataset supporting the publication ‘A Comprehensive Combined Experimental and Computational Framework for Pre-clinical Wear Simulation of Total Knee Replacements’. [Dataset]

Abdelgaied, Abdellatif and Jennings, Louise M (2022) Data associated with 'Understanding the differences in wear testing method standards for total knee replacement'. [Dataset]

Actis, Paolo and Confederat, Samuel and Seugheon, Lee and Der, Vang and Dimitrios, Soulias and Fabio, Marcuccio and Timotheus, Peace and Martin, Edwards and Pietro, Strobbia and Devleena, Samanta and Christoph, Walti (2023) Dataset for Next-Generation Nanopore Sensors Based on Conductive Pulse Sensing for Enhanced Detection of Nanoparticles. [Dataset]

Al-Hajjar, Mazen and Gremillard, L and Jennings, Louise M (2019) Data associated with 'Combined Wear and Ageing of Ceramic-on-Ceramic Bearings in Total Hip Replacement under Edge Loading Conditions'. [Dataset]

Ali, M. and Al-Hajjar, M. and Jennings, L.M. (2023) Wear and deformation of metal-on-polyethylene hip bearings under edge loading conditions due to variations in component positioning. [Dataset]

Ali, Murat and Al-Hajjar, Mazen and Fisher, John and Jennings, Louise (2019) Data associated with 'The Influence of Kinematic Conditions and Variations in Component Positioning on the Severity of Edge Loading andWear of Ceramic-on-Ceramic Hip Bearings'. [Dataset]

Ali, Murat and Partridge, Susan and Al-Hajjar, Mazen (2016) Dataset associated with 'Influence of hip joint simulator design and mechanics on the wear and creep of metal-on-polyethylene bearings'. [Dataset]

Anastasiou, Antonios and Brown, Andrew and Jha, Animesh (2018) Data associated with 'Exogenous mineralization of hard tissues using photo-absorptive minerals and femto-second lasers; the case of dental enamel'. [Dataset]

Anastasiou, Antonios and Brown, Andrew and Jha, Animesh (2019) Drug loading capacity of microporous β-pyrophosphate crystals - dataset. [Dataset]

Anastasiou, Antonios and Jha, Animesh (2019) Antibacterial properties and regenerative potential of Sr2+ and Ce3+ doped fluorapatites; a potential solution for peri-implantitis. [Dataset]

Anastasiou, Antonios and Jha, Animesh and Mathieson, Robert and Andrew, Brown (2016) Data associated with 'Sintering of calcium phosphates with a femtosecond pulsed laser for hard tissue engineering'. [Dataset]

Anastasiou, Antonios and Mathieson, Robert and Jha, Animesh (2015) Characterisation of calcium phosphates after femtosecond laser irradiation. [Dataset]

B

Beadling, Andrew Robert (2016) A Link Between the Tribology and Corrosive Degradation of Metal-on-Metal THRs – Supporting Data. [Dataset]

Beadling, Andrew Robert and Bryant, Michael and Dowson, Duncan and Neville, Anne (2021) Adverse loading effects on tribocorrosive degradation of 28 mm metal-on-metal hip replacement bearings - Supporting Data. [Dataset]

Bowland, Philippa and Ingham, Eileen and Fisher, John and Jennings, Louise (2018) Dataset associated with 'Development of a preclinical natural porcine knee simulation model for the tribological assessment of osteochondral grafts in vitro'. [Dataset]

Brockett, Claire and Carbone, Silvia and Abdelgaied, Abdellatif and Fisher, John and Jennings, Louise (2016) PEEK CFR-PEEK pin plate study dataset. [Dataset]

Brockett, Claire and Carbone, Silvia and Fisher, John and Jennings, Louise (2018) Influence of conformity on the wear of total knee replacement: An experimental study - dataset. [Dataset]

Brockett, Claire and Carbone, Silvia and Fisher, John and Jennings, Louise (2017) PEEK and CFR-PEEK knee wear dataset. [Dataset]

C

Conaghan, Philip and Edwards, Jen and Fermor, Hazel and Fisher, John and Herbert, Anthony and Ingham, Eileen and Jennings, Louise and Jones, Alison and Mengoni, Marlene and Wilcox, Ruth (2020) The Institute of Medical and Biological Engineering Knee Dataset. [Dataset]

Cooper, Robert and Day, Gavin and Wijayathunga, Nagitha and Yao, Jiacheng and Mengoni, Marlène and Wilcox, Ruth and Jones, Alison (2023) Three subject-specific human tibiofemoral joint finite element models: complete three-dimensional imaging (CT & MR), experimental validation and modelling dataset. [Dataset]

Cooper, Robert J. and Liu, Aiqin and Day, Gavin A. and Wijayathunga, Vithanage N. and Jennings, Louise M. and Wilcox, Ruth K. and Jones, Alison C. (2020) Dataset associated with ‘Development of robust finite element models of porcine tibiofemoral joints loaded under varied flexion angles and tibial freedoms’. [Dataset]

Cooper, Robert J. and Mengoni, Marlène and Williams, Sophie and Jones, Alison C. (2017) Dataset associated with 'Three-dimensional assessment of impingement risk in geometrically parameterised hips compared with clinical measures.'. [Dataset]

Cowie, Raelene and Jennings, Louise (2018) Data associated with 'The Influence of Calcium Sulfate Bone Void Filler on the Third Body Damage and Polyethylene Wear of Total Knee Replacements'. [Dataset]

Cowie, Raelene and Jennings, Louise (2016) Data associated with “Influence of Third Body Particles Originating from Bone Void Fillers on the Wear of Ultra High Molecular Weight Polyethylene”. [Dataset]

Cowie, Raelene and Jennings, Louise (2016) Data associated with “PEEK-OPTIMA (Trademark) as an Alternative to Cobalt Chrome in the Femoral Component of Total Knee Replacement: A Preliminary Study”. [Dataset]

Cowie, Raelene and Jennings, Louise (2024) Dataset associated with "The Wear and Kinematics of Two Medially Stabilised Total Knee Replacement Systems". [Dataset]

Cowie, Raelene M and Jennings, Louise M (2023) Data associated with "The influence of cross shear and contact pressure on the wear of UHMWPE-on-PEEK-OPTIMA™ for use in total knee replacement". [Dataset]

Cowie, Raelene M and Jennings, Louise M (2023) Data associated with “The Influence of Lubricant Temperature on the Wear of Total Knee Replacements”. [Dataset]

Cowie, Raelene M and Jennings, Louise M (2021) Data associated with “Third Body Damage and Wear in Arthroplasty Bearing Materials: A Review of Laboratory Methods”. [Dataset]

Cowie, Raelene M. and Jennings, Louise M. (2021) Data associated with “An experimental simulation model to assess wear of the porcine patellofemoral joint”. [Dataset]

Cowie, Raelene M. and Jennings, Louise M. (2020) Data associated with “Third body wear of UHMWPE-on-PEEK-OPTIMA™”. [Dataset]

Cowie, Raelene M. and Jennings, Louise M. (2018) Data associated with “Wear and Friction of UHMWPE-on-PEEK OPTIMA™”. [Dataset]

D

Day, Gavin A. and Jones, Alison C. and Wilcox, Ruth K. (2021) Dataset asssociated with 'Using Statistical Shape and Appearance Modelling to characterise the 3D shape and material properties of human lumbar vertebrae: A proof of concept study. [Dataset]

E

Etchels, Lee and Jones, Alison (2019) Dataset supporting the publication 'Computationally Efficient Modelling of Hip Replacement Separation Due to Small Mismatches in Component Centres of Rotation'. [Dataset]

Etchels, Lee and Wang, Lin and Thompson, Jonathan and Wilcox, Ruth and Jones, Alison (2023) Dataset supporting the publication 'Dynamic finite element analysis of hip replacement edge loading: balancing precision and run time in a challenging model'. [Dataset]

G

Green, David (2019) Dataset for Skin-deep Patterning of Calcite. [Dataset]

Greenall, Nicholas and Valavanis, Alexander and Desai, H.J. and Acheampong, D.O. and Li, Lianhe and Cunningham, John and Davies, A Giles and Linfield, Edmund and Burnett, Andrew (2016) Data associated with 'Design and Development of a Semtex Simulant Suitable for Measurements at THz Frequencies Using a Genetic Algorithm'. [Dataset]

Greenall, Nicholas and Valavanis, Alexander and Desai, H.J. and Acheampong, D.O. and Li, Lianhe and Cunningham, John E and Davies, A Giles and Linfield, Edmund and Burnett, Andrew (2016) Data associated with 'The Development of a Semtex-H Simulant for Terahertz Spectroscopy'. [Dataset]

Groves, Dawn and Williams, Sophie (2017) Data associated with ‘An In-Vitro Simulation Method for the Tribological Assessment of Complete Natural Hip Joints’. [Dataset]

H

Helliwell, Jack and Thomas, Daniel and Papathanasiou, Vaia and Homer-Vanniasinkam, Shervanthi and Desai, Amisha and Jennings, Louise and Rooney, Paul and Kearney, John and Ingham, Eileen (2017) Low concentration SDS decellularised porcine dermis. [Dataset]

Herbert, Anthony and Edwards, Jennifer and Jones, Gemma and Ingham, Eileen and Fisher, John (2017) Data supporting "The effects of irradiation dose and storage time following treatment on the viscoelastic properties of decellularised porcine super flexor tendon". [Dataset]

I

Ingham, Eileen and Vafaee, Tayyebeh and Thomas, Daniel and Desai, Amisha and Jennings, Louise and Berry, Helen and Rooney, Paul and Kearney, John and Fisher, John (2016) Characteristics of low concentration SDS decellularised human donor aortic and pulmonary valved conduits. [Dataset]

J

Jahani, Faezeh and Etchels, Lee W. and Wang, Lin and Thompson, Jonathan and Barton, David and Wilcox, Ruth K. and Fisher, John and Jones, Alison C. (2021) Dataset supporting the publication “Importance of dynamics in the finite element prediction of plastic damage of polyethylene acetabular liners under edge loading conditions”. [Dataset]

Jennings, Louise (2019) Data associated with “Biomechanical assessment of the stability of osteochondral grafts implanted in porcine and bovine femoral condyles”. [Dataset]

Jennings, Louise (2017) Data associated with “The Influence of Malalignment and Ageing Following Sterilisation by Gamma Irradiation in an Inert Atmosphere on the Wear of UHMWPE in Patella-Femoral Replacements”. [Dataset]

Jimenez-Cruz, David and Williams, Sophie (2022) Input data and photographs from the experimental simulation on the natural hip joint. [Dataset]

Johnston, Helena and Abdelgaied, Abdellatif and Pandit, Hemant and Fisher, John and Jennings, Louise M. (2018) Data set for paper "Representing the Effect of Variation in Soft Tissue Constraints in Experimental Simulation of Total Knee Replacements". [Dataset]

Johnston, Helena and Jennings, Louise M (2019) Data Associated with "The effect of surgical alignment and soft tissue conditions on the kinematics and wear of a fixed bearing total knee replacement". [Dataset]

K

Knights, Oscar B. (2017) Dataset associated with the publication 'The Influence of Gold Nanorod Size on Photoacoustic Response, Melting and Cytotoxicity'. [Dataset]

Koria, Lekha and Mengoni, Marlène and Brockett, Claire (2020) Estimating tissue-level properties of porcine talar subchondral bone - dataset. [Dataset]

Ksenija, Vasiljeva and Lunn, David and Chapman, Graham and Redmond, Anthony and Wang, Lin and Thompson, Jonathan and Williams, Sophie and Wilcox, Ruth and Jones, Alison (2024) Dynamic acetabular cup orientation in fast and slow walking total hip replacement patients: raw motion data, processed cup angles and statistical analyses. [Dataset]

L

Leva-Bueno, Juan and Meuskens, Ina and Linke, Dirk and Millner, Paul A. and Peyman, Sally A. (2022) Impedimetric biosensor based on extracellular matrix protein-adhesin binding. [Dataset]

M

Meng, Qingen and Damion, Robin and Wilcox, Ruth and Jones, Alison (2016) Dataset for "The Effect of Collagen Fibril Orientation on the Biphasic Mechanics of Articular Cartilage". [Dataset]

Mengoni, Marlène (2017) Bovine intervertebral disc mechanical characterisation dataset. [Dataset]

Mengoni, Marlène (2020) Data associated with "Using inverse Finite Element analysis to identify spinal tissue behaviour in situ". [Dataset]

Mengoni, Marlène (2020) Literature review: methods and validation of facet joints biomechanics in finite element models. [Dataset]

Mengoni, Marlène and Wilcox, Ruth (2019) Bovine intervertebral disc bulge characterisation. [Dataset]

Mengoni, Marlène and Wilcox, Ruth (2017) in-vitro evaluation of the biomechanical performance of nucleus augmentation (quasi static axial compression). [Dataset]

O

O’Dwyer Lancaster-Jones, Oscar and Fisher, John and Al-Hajjar, Mazen (2017) An in vitro simulation model to assess the severity of edge loading and wear, due to variations in component positioning in hip joint replacements dataset. [Dataset]

P

Partridge, Susan and Williams, Sophie (2017) Dataset supporting Publication “Evaluation of a New Methodology to Simulate Damage and Wear of Polyethylene Hip Replacements Subjected to Edge Loading in Hip Simulator Testing”. [Dataset]

S

Sarrami-Foroushani, Ali and Lassila, Toni and MacRaild, Michael and Asquith, Joshua and Roes, Kit C.B. and Byrne, James V. and Frangi, Alejandro F. (2021) In-silico trial of intracranial flow diverters replicates and expands insights from conventional clinical trials. [Dataset]

Smeeton, Mackenzie (2023) Dataset associated with 'A geometric method for estimating dimensional change of retrieved dual mobility liners for total hip replacement'. [Dataset]

Smyth, Alexandra and Fisher, John and Suñer, Silvia and Brockett, Claire (2017) Dataset associated with 'Influence of Kinematics on the Wear of a Total Ankle Replacement'. [Dataset]

T

Talbott, Harriet and Mengoni, Marlene (2022) Subchondral bone cysts in the ankle: patient-specific finite element study data. [Dataset]

Talbott, Harriet and Wilkins, Richard and Redmond, Anthony and Brockett, Claire and Mengoni, Marlene (2021) Changes in Morphology of the Haemophilic Talus: data derived from MR Images. [Dataset]

V

Vafaee, Tayyebeh and Campbell, Fiona and Thomas, Dan and Roderjan, João Gabriel and Lopes, Sergio Veiga and da Costa, Francisco DA and Desai, Amisha and Rooney, Paul and Jennings, Louise M and Fisher, John and Berry, Helen and Ingham, Eileen (2022) Implantation of decellularized porcine pulmonary heart valves in sheep - dataset. [Dataset]

Y

Yao, Jiacheng and Mengoni, Marlène (2023) Meniscus sensitivity to knee contact mechanics - computational data. [Dataset]

Research Data Leeds Repository is powered by EPrints
Copyright © 2024 University of Leeds